References
Success Stories
Success Stories
The project
A customer in the photovoltaic sector contacted AUTFORCE after a fire broke out in an inverter when the DC switches of a PV system were switched off. The inverter then failed completely, with the display and controls no longer responding. AUTFORCE was commissioned to conduct a comprehensive investigation to determine the cause of the incident and prevent similar damage in the future.
Read moreThe project
For our customer in the energy technology industry, we implemented an automated testing system for quality control of insulated winding conductors used in transformers. The aim was to reliably detect damage to the insulation and thus ensure the quality of the subsequent windings.
Read moreThe project
What can be done when each individual component is particularly costly to manufacture and errors in assembly can quickly lead to further costs? AUTFORCE has developed a suitable solution for a leading manufacturer of aluminum die-cast components: a testing system with two coordinated stations, a measuring station and an assembly station.
Read moreThe project
Little space. High quantities. No trade-offs.
How do you fit a fully automated inverter end-of-line test into an area barely larger than an average office? A customer presented AUTFORCE with this challenge – and it was as demanding as it was appealing: a high-performance test bench that could keep up with the pace of large-scale production with up to 950 inverters per shift was to be built on just 20 m².
Read moreThe test bench for switching valves enables precise tests and laser marking, and can be flexibly adapted to different valve types.
Read moreThe project
At the request of a leading global manufacturer of drive and control technology, we were able to support the implementation of an inverter end-of-line (EOL) station. A functional test cabinet from AUTFORCE was supplied for this project. This contains the intelligence and control of the test sequences as well as the necessary measuring devices.
Read moreThe project
We have developed a customized laboratory test bench for a leading Tier 1 supplier to the automotive industry, which is specially designed for testing electric motors in the prototype phase and for small series production. With its comprehensive test coverage and modular expandability, this test bench enables precise quality control and meets the high standards of the automotive industry.
Read moreContacting and safety-compliant test housing.
Read moreTesting the inverter at the end of assembly.
Read moreThe project
We were able to implement a testing system & sorting system for medical technology for our customer. In this process, components are checked, classified and then sorted into separate storage containers.
Read morePrecise testing of electromechanical roll control (ERC).
Read moreLiquids, dust, or air – component leaks usually lead to errors in downstream processes or product defects at the end customer. To avoid these scenarios and the resulting follow-up costs, it is necessary to test products for proper tightness.
Read moreThe project
We were able to implement an end-of-line inverter test bench for our customer. The inverters (front axle and rear axle) for an electric vehicle are tested and then packaged. The following tests are carried out:
Read moreAn automatic optical inspection system (AOI) has been developed to check the placement of printed circuit boards, which detects a wide range of characteristics.
Read morePrecise testing of gearboxesincluding data traceability and operator guidance!
Read moreWould you like to test your weld seams / spot welds automatically?
We can also support you with solutions for the optical inspection of weld seams.
Read moreDark inclusions in plastic injection molded parts are a annoying, time-consuming and expensive problem. Also for this challenge we were able to find a reliable solution for defect sizes up to min. 0,1mm² develop.
Read moreCapture up to 120 individual bobbins in just one second?No problem thanks to multi-label scanning!
Read moreQuality assurance within the production flow: a completely logical step.Our customer KWK goes one step further and automates the final inspection of loaded pallets with our help.
Read moreQuality assurance and an important production step in one.With our multi-stage testing and oiling system, we guarantee our customers a consistent process flow.
Read moreFor our customer we were allowed to build a compact test station including a swivel unit.
Read moreWe were able to demonstrate our expertise in the field of customized systems with a winding system for copper coils.
Read moreFor our customer PAYER, we were able to implement an assembly process using a collaborative robot with our CUBES.
Read moreAnother CUBE has left our assembly hall and is now being used by our customer for electrical testing and laser marking of motor coils.
Read moreWe were able to implement 3 CUBES for laser marking & DMC verification, leak testing and electrotechnical testing for our customer.
Read moreWith Oberaigner Powertrain GmbH, another customer can now benefit from our modular test stations, the AUTFORCE CUBES!
Read moreA new generation of quality assurance for tank caps:More efficient, more powerful, more user-friendly!
Read moreWe implemented a fully automated vision inspection solution for the optical quality control ofpharmaceutical glassware for Stölzle Oberglas.
Read more
