EN
Lupe
Get in
touch

PLC function modules

A motor, a CPU and no suitable communication? Why reinvent the wheel when you can do things more easily? Instead of laborious and time-consuming programming of the communication itself, we offer ready-made function modules for this purpose. Through our years of experience in software programming, we have created and perfected a range of modules for a wide variety of applications

If the appropriate module is not yet available in our extensive function library, we will be happy to develop it on request. Just let us know what you need and we will work with our experts to find the best solution.

Send an enquiry now

Time saving

With our function modules, devices can be connected with just a few clicks. Save the time and money you would spend on a new development.

Uniform design

The uniform design of the software structure makes it easy to find your way around. Thanks to visualization by means of our image module, a consistent look & feel is ensured.

Expertise

Does your expertise lie in areas other than software programming? As a certified Siemens & Beckhoff partner, let us handle that part of things for you.

Tried & tested

Benefit from our 20 years of expertise on the shop floor. Our function modules have already proven themselves in a wide variety of industries.

How exactly do you get your function module?

Quite simply:

  1. Select the desired function module from the list below
  2. Send a request by e-mail
  3. You will receive an offer from us
  4. After successful ordering, we will send you the module including the license key by e-mail. Simple & uncomplicated!

Do you still have questions? Just get in touch with us!

Contact us

Device-dependent function modules

ABB
  • DSQ352 connection for robot via Profibus
    Prerequisite: S7 Classic / S7 TIA
  • IRC5 basic communication – PLC control module
    Prerequisite: S7 TIA
  • IRC5 basic communication – HMI – operation, parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • IRC5 basic communication – HMI overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel
Enquiry ABB function module

ATEQ
  • Fxxx via Profibus
    Prerequisite: S7 Classic / S7 TIA
    Learn more
  • Fxxx via Profinet
    Prerequisite: S7 Classic / S7 TIA
    Learn more
  • Fxx digital
    Prerequisite: S7 Classic / S7 TIA
    Learn more
  • Fxxx – PLC – control module
    Prerequisite: S7 TIA
    Learn more
  • Fxxx – HMI – operation, parameterisation, diagnosis (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
    Learn more
  • Fxxx – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel
    Learn more
  • ATEQ DataBuffer – PLC control module
    Prerequisite: S7 TIA
    Learn more
  • ATEQ DataBuffer – HMI – Display result data buffer (248×88)
    Prerequisite: WinCC-TIA, Comfort Panel
    Learn more
Enquiry ATEQ function module

Balluff
  • BIP – positioning system BIP IO-Link
    Prerequisite: S7 Classic
  • RFID M-60×2 – Communication between S7 and read/write heads
    Prerequisite: S7 Classic
Enquiry Balluff function block

Baumer
  • Baumer absolute value rotary encoder GXMMW
    Prerequisite: S7 Classic
Enquiry Baumer function module

Berger Lahr / Schneider
  • Schneider Electric LXM32M
    Prerequisite: S7 Classic
  • Compact drive for IFS6x
    Prerequisite: S7 Classic
  • Compact drive ILA1B
    Prerequisite: S7 Classic
  • Power unit SD328Bx
    Prerequisite: S7 Classic / S7 TIA
  • Servo motor module PTP – operation for TLC53x
    Prerequisite: S7 Classic
  • Control LXM05B
    Prerequisite: S7 Classic
  • PacDrive control
    Prerequisite: S7 TIA
Enquiry Berger Lahr function module

Bosch
  • RFID system ID40
    Prerequisite: S7 Classic
  • Bosch SE302
    Prerequisite: S7 Classic
  • Bosch SE311DP
    Prerequisite: S7 Classic
  • Bosch 1-channel CS35x – PLC – control module
    Prerequisite: S7 TIA
  • Bosch 1-channel CS35x – HMI – operation, parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Bosch 1-channel CS35x – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel
Enquiry Bosch function module

Burster
  • Burster Profibus module 9221
    Prerequisite: S7 Classic
  • Burster Megohmmeter type 24508 via RS232
    Prerequisite: S7 TIA
Enquiry Burster function module

Cognex
  • PKW Digivex Motion 3554
    Prerequisite: S7 Classic
  • PZD Digivex Motion 3554
    Prerequisite: S7 Classic
  • Cognex camera ISxxxx – control
    Prerequisite: S7 TIA
  • Cognex DataMan x – PLC – control module
    Prerequisite: S7 TIA
  • Cognex DataMan x – HMI – operation, parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Cognex DataMan x – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel
Enquiry Cognex function block

Danfoss
  • Danfoss VLT Midi Drive FU speed ctrl. – PLC – control module
    Prerequisite: S7 TIA
  • Danfoss VLT Midi Drive FU speed ctrl. – HMI – operation, parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Danfoss VLT Midi Drive FU speed ctrl. – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel
Enquiry Danfoss function module

Datalogic
  • Datalogic MX4000
    Prerequisite: S7 Classic
Enquiry Datalogic function module

Digivex
  • DataMan scanner/camera
    Prerequisite: S7 Classic
Enquiry Digivex function module

Discom
  • DISCOM Rotas
    Prerequisite: S7 Classic / S7 TIA
  • DISCOM TAS
    Prerequisite: S7 Classic
  • DISCOM PN communication modules (Rcv64 + Snd64)
    Prerequisite: S7 Classic / S7 TIA
Enquiry Discom function module

DSM
  • DSM press
    Prerequisite: S7 Classic
  • DSM ReadValue MSFlA
    Prerequisite: S7 Classic
  • DSM MultiPro FL1
    Prerequisite: S7 Classic
  • DSM MultiPro TA1
    Prerequisite: S7 Classic
Enquiry DSM function module

Endress & Hauser
  • E-H Promass 63DP-RD
    Prerequisite: S7 Classic
Enquiry Endress & Hauser function module

Festo
  • Festo motor controller CMMP-AS-..-M3 control module
    Prerequisite: S7 Classic / S7 TIA
  • Festo motor controller CMMP-AS-..-M3 image module
    Prerequisite: WinCC-TIA, Comfort Panel
  • Festo motor controller FHPP protocol – PLC – control module
    Prerequisite: S7 TIA
  • Festo motor controller FHPP protocol – HMI – operation, parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Festo motor controller FHPP protocol – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel
Enquiry Festo function module

Keithley
  • Keithley 2002
    Prerequisite: S7 Classic
Enquiry Keithley function module

Keyence
  • Keyence SR75x scanner
    Prerequisite: S7 Classic
  • Keyence SR75x scanner data exchange via CP (FC11,FC12)
    Prerequisite: S7 Classic
  • Keyence SR xxxx 2D code scanner – PLC – control module
    Prerequisite: S7 TIA
  • Keyence SR xxxx 2D code scanner – HMI – operation, parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Keyence SR xxxx 2D code scanner – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel
Enquiry Keyence function module

Kistler
  • Kistler Maximo – PLC – control module
    Prerequisite: S7 Classic / S7 TIA
  • Kistler Maximo – HMI – operation, parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Kistler Maximo – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel
Enquiry Kistler function module

Lenze
  • Lenze servo controller E94AYCPM
    Prerequisite: S7 Classic
  • Lenze positioning controller 93xx parameter data channel
    Prerequisite: S7 Classic
  • Lenze positioning controller 93xx process data channel
    Prerequisite: S7 Classic
  • Lenze 8400 speed control module
    Prerequisite: S7 Classic / S7 TIA
  • Lenze 8400 State Line technology function RPM
    Prerequisite: S7 Classic
  • Lenze 9400 (E94) Lenze standard application test bench drive
    Prerequisite: S7 Classic
  • Lenze 9400 (E94) positioning – PLC – control module
    Prerequisite: S7 TIA
  • Lenze 9400 (E94) positioning – HMI – operation, parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Lenze 9400 (E94) positioning – HMI – operation, parameterization, diagnostics (480×224)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Lenze 9400 (E94) positioning – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Lenze 9400 (E94) speed mode – PLC – control module
    Prerequisite: S7 TIA
  • Lenze 9400 (E94) speed mode – HMI – operation, parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Lenze 9400 (E94) speed mode – HMI – operation, parameterization, diagnostics (480×224)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Lenze 9400 (E94) speed mode – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Lenze I5xx speed mode – PLC – control module
    Prerequisite: S7 TIA
  • Lenze I5xx speed mode – HMI – operation, parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Lenze I5xx speed mode – HMI – operation, parameterization, diagnostics (480×224)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Lenze I5xx speed mode – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Lenze 8400motec speed mode – PLC – control module
    Prerequisite: S7 TIA
  • Lenze 8400motec speed mode – HMI – operation, parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Lenze 8400motec speed mode – HMI – operation, parameterization, diagnostics (480×224)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Lenze 8400motec speed mode – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Lenze SM301 safety module input / output (only PDT no function)
    Prerequisite: S7 TIA
Enquiry Lenze function block

Leuze
  • Leuze MAxxi Gateway in TransparentMode 64Byte
    Prerequisite: S7 Classic
Enquiry Leuze function block

Satorius
  • Satorius scale CAISxx – PLC – control module
    Prerequisite: S7 Classic / S7 TIA
  • Satorius CAISxx scale – HMI – operation, parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Satorius CAISxx scale – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel
Enquiry Satorius function module

Panasonic

Panasonic laser LPxxx

Further information (functional description & pictures)

  • Panasonic laser LPxxx – PLC – control module
    Prerequisite: S7 TIA
  • Panasonic laser LPxxx – HMI – operation, parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Panasonic laser LPxxx – HMI – operation, parameterization, diagnostics (480×224)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Panasonic laser LPxxx – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel
Enquiry Panasonic function module

Parker
  • Compax3 pos. controller PZD – channel
    Prerequisite: S7 Classic / S7 TIA
  • PKW_Compax3 pos. controller 93xx
    Prerequisite: S7 Classic
Enquiry Parker function module

Pepperl & Fuchs
  • Ident 4HB6
    Prerequisite: S7 Classic
Enquiry Pepperl & Fuchs function block

SEW
  • SEW_MOVIT_B – Movitrac B control – Profibus connection
    Prerequisite: S7 Classic
Enquiry SEW function module

Siemens

Further information on the Siemens ASM450/ASM470 function module (images + function description)

  • Siemens Profibus interface for CB15 module (Micromaster, …
    Prerequisite: S7 Classic
  • Sinamics S120 single positioner (EPOS)
    Prerequisite: S7 Classic / S7 TIA
  • Sinamics S120 single positioner HMI (image module)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Sinamics S120 single positioner HMI small (image module) overview screen/selection
    Prerequisite: WinCC-TIA, Comfort Panel
  • Sinamics S120 application test bench drive
    Prerequisite: S7 Classic / S7 TIA
  • Sinamics S120 application test bench drive image module
    Prerequisite: WinCC-TIA, Comfort Panel
  • Sinamics S120 application test bench drive image module 2x
    Prerequisite: WinCC-TIA, Comfort Panel
  • Sinamics S120 application test bench drive image module 3x
    Prerequisite: WinCC-TIA, Comfort Panel
  • Sinamics S120 application test bench drive image module small
    Prerequisite: WinCC-TIA, Comfort Panel
  • Sinamics S120 application test bench drive image module small 2x
    Prerequisite: WinCC-TIA, Comfort Panel
  • Sinamics S120 application test bench drive image module small 3x
    Prerequisite: WinCC-TIA, Comfort Panel
  • Sinamics S120 speed and torque limitation
    Prerequisite: S7 Classic
  • Sinamics S120, power supply
    Prerequisite: S7 Classic / S7 TIA
  • Sinamics S120, control with Standard Telegram 20
    Prerequisite: S7 Classic
  • Sinamics acyclic channel
    Prerequisite: S7 Classic
  • Micromaster 4xx – control
    Prerequisite: S7 TIA
  • Siemens 1500 CPU status
    Prerequisite: S7 TIA
  • SIDOOR PN – PLC – control module
    Prerequisite: S7 TIA
  • SIDOOR PN – HMI – operation, parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • SIDOOR PN – HMI – operation, parameterization, diagnostics (480×224)
    Prerequisite: WinCC-TIA, Comfort Panel
  • SIDOOR PN – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Sinamics S210 jog, pos. & vel. – PLC – control module
    Prerequisite: S7 TIA
  • Sinamics S210 jog, pos. & vel. – HMI – operation, parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Sinamics S210 jog, pos. & vel. – HMI operation, parameterization, diagnostics (480×224)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Sinamics S210 jog, pos. & vel. – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel
Enquiry Siemens function block

Stanley
  • STANLEY screwdriver control
    Prerequisite: S7 Classic
  • STANLEY screwdriver evaluation
    Prerequisite: S7 Classic
Enquiry Stanley function module

TOX
  • TOX EPW400 – press evaluation
    Prerequisite: S7 Classic
Enquiry TOX function module

TR Electronic
  • LE-200
    Prerequisite: S7 Classic / S7 TIA
Enquiry TR Electronic

Trumpf
  • Trumpf laser control CpxV3
    Prerequisite: S7 TIA
Enquiry Trump function module

Turck
  • Turck 2RFID-A
    Prerequisite: S7 Classic
Enquiry Turck function block

Weber
  • Weberschrauber WSG100 screwdriver control
    Prerequisite: S7 Classic
Enquiry Weber function module

Weiss
  • Weberschrauber WSG100 screwdriver control
    Prerequisite: S7 TIA
  • Weiss EF2 rotary indexing table – PLC – control module
    Prerequisite: S7 TIA
  • Weiss EF2 rotary indexing table – HMI – operation, parameterization, diagnostics (624×352)
    VOraussetzung: S7 TIA
  • Weiss EF2 rotary indexing table – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: S7 TIA
Enquiry Weiss function module

Wostor
  • SIC Marking embossing control
    Prerequisite: S7 Classic
  • SIC Marking embossing control – PLC – control module RS232
    Prerequisite: S7 TIA
  • SIC Marking embossing control – HMI – operation, parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • SIC Marking embossing control – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel
Enquiry Wostor function module

Zeiss
  • ZsCMM_CTRL
    Prerequisite: S7 Classic / S7 TIA
Enquiry Zeiss function module

Cross-device function modules

autfactory Trigger
  • Channel data stream – PLC – control module
    Prerequisite: S7 TIA
  • Channel data stream timestamp – PLC – evaluation module
    Prerequisite: S7 TIA
  • Channel data stream – HMI – overview, status/parameterization (248×88)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Check In Out – PLC – control module
    Prerequisite: S7 TIA
  • Check In Out – HMI – overview, status/parameterization (248×88)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Merge Change Tag – PLC – control module
    Prerequisite: S7 TIA
  • Merge Change Tag – HMI – overview, status/parameterization (248×88)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Trigger X – PLC – control module
    Prerequisite: S7 TIA
  • Trigger X – HMI – overview, status/parameterization (248×88)
    Prerequisite: WinCC-TIA, Comfort Panel
  • UID Request – PLC – control module
    Prerequisite: S7 TIA
  • UID Request – HMI – overview, status/parameterization (248×88)
    Prerequisite: WinCC-TIA, Comfort Panel

autfactory Sequencer
  • Sequencer Main – PLC – control module
    Prerequisite: S7 TIA
  • Sequencer DCpy – PLC – data copying module
    Prerequisite: S7 TIA
  • Sequencer Main – HMI – diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Sequencer Main – HMI – overview, status/selection (248×88)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Sequencer Main – HMI – result information[Zeile](352×16)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Sequencer Main – HMI – result information [Zeile] (608×16)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Sequencer Main – HMI – result information[Zeile](352×24)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Sequencer Main – HMI – result information [Zeile] (352×40)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Basic Work module – PLC – step chain module
    Prerequisite: S7 TIA
  • Run-in work calculation module – PLC – step chain module including calculation module
    Prerequisite: S7 TIA
  • Characteristic curve point recording module – PLC – step chain module (additional module – REAL measurement recording required)
    Prerequisite: S7 TIA
  • Discom module – PLC – step chain module (additional module – Discom control required)
    Prerequisite: S7 TIA
  • Drive module – PLC – step chain module
    Prerequisite: S7 TIA
  • Measurement recording 1 measurement module – PLC – step chain module (additional module – REAL measurement recording required)
    Prerequisite: S7 TIA
  • Evaluate shutdown status module – PLC – step chain module
    Prerequisite: S7 TIA
  • Send receive module – PLC – step chain module
    Prerequisite: S7 TIA
  • Torque control module – PLC – step chain module
    Prerequisite: S7 TIA
  • Value setting current step module – PLC – step chain module
    Prerequisite: S7 TIA
  • Wait module – PLC – step chain module
    Prerequisite: S7 TIA
  • Status module – HMI – diagnostics (33×168)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Status description module – HMI – diagnostics (48×168)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Shutdown acknowledgement – PLC – shutdown module
    Prerequisite: S7 TIA
  • Shutdown drive monitoring – PLC – shutdown module
    Prerequisite: S7 TIA
  • Shutdown signal monitoring 10 channels – PLC – shutdown module
    Prerequisite: S7 TIA
  • Shutdown signal monitoring 10 channels with delay – PLC – shutdown module
    Prerequisite: S7 TIA
  • Shutdown signal monitoring 1 channel – PLC – shutdown module
    Prerequisite: S7 TIA
  • Shutdown differential value evaluation – PLC – shutdown module
    Prerequisite: S7 TIA
  • Shutdown value monitoring MinMax – PLC – shutdown module
    Prerequisite: S7 TIA

BDE
  • Station data acquisition
    Prerequisite: S7 Classic
  • VDA batch acquisition
    Prerequisite: S7 Classic

COM
  • Communication with Boolean variables – PLC – control module S7 Classic / S7-TIA Communication with Boolean variables – HMI – diagnostics WinCC-TIA, Comfort Panel Communication Boolean variables with repetition S7 Classic Digital connection external device S7 Classic
  • Communication monitoring – PLC – control module (watchdog)
    Prerequisite: S7 Classic / S7 TIA
  • Communication monitoring – HMI – status, parameterization (248×88)
    Prerequisite: WinCC-TIA, Comfort Pane
  • Module for MODBUS UDP
    Prerequisite: S7 Classic
  • Module for MODBUS TCP
    Prerequisite: S7 Classic
  • Module for MODBUS server
    Prerequisite: S7 Classic
  • MPI – Communication
    Prerequisite: S7 Classic
  • Numerical communication – PLC – control module
    Prerequisite: S7 Classic / S7 TIA
  • Numerical communication – HMI – diagnostics
    Prerequisite: WinCC-TIA, Comfort Panel
  • Numerical communication V4.x
    Prerequisite: S7 Classic
  • FDL – communication (master module)
    Prerequisite: S7 Classic
  • FDL – communication (slave module)
    Prerequisite: S7 Classic

Compare
  • Any_Equal – Any comparer on equal
    Prerequisite: S7 Classic
  • CMP_DI_TOL – Compare value with tolerance window
    Prerequisite: S7 Classic
  • CMP_I_TOL – Compare value with tolerance window
    Prerequisite: S7 Classic
  • CMP_MiMa – Compare value with Min- Max
    Prerequisite: S7 Classic
  • CMP_R_TOL – Compare value with tolerance window
    Prerequisite: S7 Classic
  • CAM – cam controller
    Prerequisite: S7 Classic
  • Comparison via hysteresis
    Prerequisite: S7 Classic

Convert
  • ATF_CHAR_to_DINT – change of characters to DINT
    Prerequisite: S7 Classic
  • ATF_CHAR_to_REAL – change of characters to REAL
    Prerequisite: S7 Classic
  • ATF_CHARtoSTRING – convert CHAR to STRING
    Prerequisite: S7 Classic
  • ATF_DateTime2String – Date – time in string
    Prerequisite: S7 Classic
  • ATF_DINT_to_CHAR – convert DINT to characters
    Prerequisite: S7 Classic
  • ATF_Int2Bool – integer value on bit pattern
    Prerequisite: S7 Classic
  • ATF_Int2DateTime – convert Int to Date and Time
    Prerequisite: S7 Classic
  • ATF_STRCC2CHAR – assemble strings into character sequence
    Prerequisite: S7 Classic
  • ATF_STRING2CHAR – copy string to CHAR
    Prerequisite: S7 Classic
  • ATF_String2String – copy string to string
    Prerequisite: S7 Classic
  • ATF_StringInChar – search string in a character buffer
    Prerequisite: S7 Classic

Count
  • ATF_PULSE_PAUSE – square gen. with variable pulse pause time
    Prerequisite: S7 Classic / S7 TIA
  • ATF_Sum_Pulse – summation via a pulse input
    Prerequisite: S7 Classic
  • Quantity counter
    Prerequisite: S7 Classic

CPU
  • ATF_FC_EVAL_1 – OB – error evaluation
    Prerequisite: S7 Classic

CYCL
  • Step Chain (SCL) – PLC – template
    Prerequisite: S7 TIA
  • Step chain (SCL) – HMI – diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Step chain (SCL) – HMI – overview, status/selection (248×88)
    Prerequisite: WinCC-TIA, Comfort Panel

Data Handling
  • ATF_COPY_BYTES – copy data specifying the number of bytes
    Prerequisite: S7 Classic
  • ATF_DEL_STRNG – delete string
    Prerequisite: S7 Classic
  • ATF_Load_Data
    Prerequisite: S7 Classic
  • ATF_PRM_VISU – parameterization module for visualization
    Prerequisite: S7 Classic
  • ATF_PrmPrv_CTRL – module for parameterization and copying via index
    Prerequisite: S7 Classic
  • ATF_RD_STRNG_H – reading of the string header
    Prerequisite: S7 Classic
  • ATF_RINGBUF – ring buffer
    Prerequisite: S7 Classic
  • ATF_WR_STRNG_H – generate a string header
    Prerequisite: S7 Classic
  • Parameterization or provision of data
    Prerequisite: S7 TIA
  • Convert, Bool Struct 128 to Word Array 8 and output when one bit is true
    Prerequisite: S7 TIA

Date_and_Time
  • ATF_BTR_STD – operating hours counter
    Prerequisite: S7 Classic
  • ATF_CMP_HOUR_MIN – compare hours, minutes and seconds
    Prerequisite: S7 Classic
  • Date – time difference
    Prerequisite: S7 Classic
  • Output day of the year
    Prerequisite: S7 Classic
  • Stopwatch
    Prerequisite: S7 Classic
  • Time Compare
    Prerequisite: S7 Classic
  • Stopwatch start-stop
    Prerequisite: S7 Classic
  • ATF_TOff_CntDown
    Prerequisite: S7 Classic
  • ATF_TON – switch-on delay
    Prerequisite: S7 Classic
  • ATF_TON_CntDown – switch-on delay
    Prerequisite: S7 Classic
  • Calendar week according to ISO 8601
    Prerequisite: S7 Classic
  • Time of day
    Prerequisite: S7 Classic
  • Timer
    Prerequisite: S7 Classic
  • Form time difference
    Prerequisite: S7 TIA

Drives
  • Reversing contactor – PLC – control module (RECO)
    Prerequisite: S7 Classic / S7 TIA
  • Reversing contactor – HMI – operation, parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Reversing contactor – HMI – operation, parameterization, diagnostics (480×224)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Reversing contactor – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel
  • ATF_RTT_MB – module for rotary indexing table control
    Prerequisite: S7 Classic
  • Hydraulic power unit – PLC – control module
    Prerequisite: S7 Classic / S7 TIA
  • Hydraulic power unit – HMI – operation, parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Hydraulic power unit – HMI – operation, parameterization, diagnostics (480×224)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Hydraulic power unit – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Rotary indexing table with motor
    Prerequisite: S7 Classic

ET200S
  • ATF_CNTC_ET200S – counter card ET200S counting mode
    Prerequisite: S7 Classic
  • ATF_SI_READ – serial read via ET200S
    Prerequisite: S7 Classic
  • ATF_SI_VSET – set V24 signals
    Prerequisite: S7 Classic
  • ATF_SI_WRITE – serial write via ET200S
    Prerequisite: S7 Classic
  • ET200S-SI_Receive
    Prerequisite: S7 Classic

GSM
  • M20 terminal
    Prerequisite: S7 Classic

F_Programm
  • Acknowledgement button monitoring – F program
    Prerequisite: S7 TIA

Funktionen
  • Duplicate / merge requirements (XREQ)
    Prerequisite: S7 TIA

HMI
  • ATF_DRV_CTRL – drive control and visualization
    Prerequisite: S7 Classic
  • ATF_DRV_CTRL – control module positioning drives
    Prerequisite: S7 Classic
  • ATF_ERR_ACKN – search for error and execute acknowledgement on display
    Prerequisite: S7 Classic
  • ATF_ERR_ACKNH – search for error and execute acknowledgement on display + horn
    Prerequisite: S7 Classic
  • ATF_ERR_MSG – search for error or operating message
    Prerequisite: S7 Classic
  • ATF_FB_OPR – operator module
    Prerequisite: S7 Classic
  • Operation – PLC – control module
    Prerequisite: S7 TIA
  • Operation – HMI – operation, parameterization, diagnostics (640×416)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Operation – HMI – operation, diagnostics (480×224)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Operation – HMI – Start, ACKN, Stop, Step and Reset keys (120×232)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Operation – HMI – status bar (280×40)
    Prerequisite: WinCC-TIA, Comfort Panel
  • ATF_TSYNC synchronization of date – time
    Prerequisite: S7 Classic
  • Display order
    Prerequisite: S7 Classic
  • Template – HMI – main (480×272)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Template – HMI – main (800×480)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Template – HMI – main (1920×1080)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Safety status – HMI – drive, light grid, emergency stop, safety door, safety mat and two-hand control (120×40) [7Stk]
    Prerequisite: WinCC-TIA, Comfort Panel
  • Table – HMI – header, Row_Value_…[5 Stück] (480×24/48)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Area pointer control job user – PLC – control module
    Prerequisite: S7 TIA
  • Basic template – HMI – PDT + status/selection (120×40) + icon (40×40) + image (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel

Math
  • ATF_LIN_RAMP – linear ramp
    Prerequisite: S7 Classic / S7 TIA
  • Random generator
    Prerequisite: S7 Classic / S7 TIA
  • Curve generator
    Prerequisite: S7 Classic / S7 TIA

Meas
  • Measurement acquisition REAL [1x] – PLC – control module
    Prerequisite: S7 Classic / S7 TIA
  • Measurement acquisition REAL [1x] – HMI – status (248×88)
    Prerequisite: WinCC-TIA, Comfort Panel

Nacharbeitsplatz
  • ATF_FB_RWK – rework station
    Prerequisite: S7 Classic / S7 TIA

Norm
  • Analog input with y = kx +d
    Prerequisite: S7 Classic
  • Analog output (y = kx + d)
    Prerequisite: S7 Classic
  • Standardization with position monitoring and offset – PLC – control module
    Prerequisite: S7 Classic / S7 TIA
  • Standardization with position monitoring and offset – HMI – parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Standardization with position monitoring and offset – HMI – parameterization, diagnostics (248×88)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Standardization with position monitoring and offset – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel

RFID
  • ATF_ASM45x – connection module
    Prerequisite: S7 Classic
  • ATF_ASM450 – connection module
    Prerequisite: S7 Classic
  • ATF_ASM470 – connection module
    Prerequisite: S7 Classic

Schrittkette
  • Oil filling with empty weight measurement – PLC – control module
    Prerequisite: S7 Classic / S7 TIA
  • Oil filling with empty weight measurement – HMI – diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Oil filling with empty weight measurement – HMI – overview, status/selection (248×88)
    Prerequisite: WinCC-TIA, Comfort Panel
  • ATF_FB_Data_CChk
    Prerequisite: S7 Classic
  • ATF_FC_FGD – function group and data
    Prerequisite: S7 Classic

Sensor
  • Digital sensor – PLC – control module
    Prerequisite: S7 Classic / S7 TIA
  • Digital sensor – HMI – parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Digital sensor – HMI – parameterization, diagnostics (480×224)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Digital sensor – HMI – overview, status/selection (120×40) + 4xicon (40×40)
    Prerequisite: WinCC-TIA, Comfort Pane

TM – Technologiemodul
  • TM counter card (ET200SP+ET200MP) – PLC – control module
    Prerequisite: S7 TIA
  • TM counter card (ET200SP+ET200MP) – HMI – parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • TM counter card (ET200SP+ET200MP) – HMI – parameterization, diagnostics (480×224)
    Prerequisite: WinCC-TIA, Comfort Panel
  • TM counter card (ET200SP+ET200MP) – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel

Trans
  • Conveyor bowl, linear feeder – PLC – control module
    Prerequisite: S7 Classic / S7 TIA
  • Conveyor bowl, linear conveyor – HMI – operation, parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Conveyor bowl, linear conveyor – HMI – operation, parameterization, diagnostics (480×224)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Conveyor bowl, linear conveyor – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Stopper module – PLC – control module
    Prerequisite: S7 Classic / S7 TIA
  • Stopper module – HMI – operation, parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Stopper module – HMI – operation, parameterization, diagnostics (480×224)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Stopper module – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Stopper module – PLC – transfer of operating modes + individual movement (FIF)
    Prerequisite: S7 TIA

Valve
  • ATF_V2LS_CIS_x
    Prerequisite: S7 Classic
  • ATF_V2LS_INSIG – input signals for valves
    Prerequisite: S7 Classic
  • ATF_V2LS_MAN – valve control module with manual mode
    Prerequisite: S7 Classic
  • ATF_V2LS_OUTSIG – valve output signals
    Prerequisite: S7 Classic
  • Valve module 2LS – PLC – control module
    Prerequisite: S7 TIA
  • Valve module 2LS – PLC – transfer of operating modes + individual movement (FIF)
    Prerequisite: S7 TIA
  • Valve module 2LS – PLC – additional module for more limit switches per valve
    Prerequisite: S7 TIA
  • Valve module 2LS – HMI – operation, parameterization, diagnostics (624×352)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Valve module 2LS – HMI – operation, diagnostics (480×224)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Valve module 2LS – HMI – overview, status/selection (120×40) + icon (40×40)
    Prerequisite: WinCC-TIA, Comfort Panel
  • Valve module 2LS – HMI – operation, with space for e.g. measurement display
    Prerequisite: WinCC-TIA, Comfort Panel

VR024
  • VR024 calibration
    Prerequisite: S7 Classic / S7 TIA
  • VR024 calibration image module base
    Prerequisite: WinCC-TIA, Comfort Panel
  • VR024 calibration image module line
    Prerequisite: WinCC-TIA, Comfort Panel

Your required PLC function module is not listed?

Please contact us for an individual offer.

Christian Hanbauer
Head of Sales

+43 (664) 88 71 02 50
christian.hanbauer@autforce.com

Contact us